Skok Machine Tools

your machine tools partner

011 392 3710-(JHB) / 041 363 8535-(PE)

Ocean Machinery - Ocean Clipper CNC Angle Line - Ocean Clipper CNC Angle Line Specifications

The Ocean Clipper CNC angle line is simply the most compact and most affordable CNC Angle line available to the small to medium structural steel fabricator. Built in the USA by Peddinghaus, the Ocean Clipper is capable of processing angle up to 6x6x5/8" - see the full specifications below

angle line specs



Below are the specifications for the Ocean Clipper CNC Angle Line

Angle Sizes

Max Angle Size

6 x 6 x 5/8”     (150 x 150 x 15mm)

Minimum Angle Size

1-1/2 x 1-1/2 x 1/8”    (40 x 40 x 4mm)

Drill One Leg – Round Hole Only

Minimum Hole Diameter 


Maximum Hole Diameter 


Minimum Drill Gauge


Maximum Drill Gauge


Drill Feed Rate

2-10 ipm 

Punch One Leg – Slots, holes, shapes etc,

Punching Tonnage

75 Tons US  (68 Metric Tons)

Maximum Slot Size

1 1/4” Diameter - Standard (270);

26mm Diameter - Metric (PFP #3);

Punch Cycle time

2 seconds

Minimum Gauges

Using 272 punches, 271 dies

11/16” plus leg thickness for 1 1/2” x 1 1/2” through 2” x 2” angle

1 3/16” plus leg thickness for 2 1/2” x 2 1/2” angle.

1 1/4” plus leg thickness for 3” through 6”angle sizes.

Minimum Gauges

Using PFP#3 punches and dies

15mm (.59”) plus leg thickness for 40mm x 40mm (1 1/2” x 1 1/2”) through 50mm x 50mm (2” x 2”) angle sizes.

24mm (.94”) plus leg thickness for anything over 50mm x 50mm (2” x 2”) through 150mm x 150mm (6” x 6”) angle sizes.

Shear – Cut to Length

Shear Tonnage

100 Tons US  (91 Metric Tons)

Minimum Drop


Shear Cycle Time 

5 seconds

Slug Size 


0” with optional single cut shear for up to 4 x 4 x 3/8” angle


In-feed Speed (X Axis)

61 FPM (18.5 meters/min.) maximum

Maximum “X” Direction Stroke


“Y” Axis travel

12” starting ½” past datum.

“Z” Axis travel

9” starting ½” past datum


Machine Pass Line



Punch Frame/ Shear Assembly - 5,000 Lbs (2258 kg)

X-Axis Assembly - 900 Lbs (408 kg)

Power Unit for In-feed Sections - 300 Lbs (136 kg)  each

Power Requirements


Shop Air 

80 PSI 


4” (100mm) concrete


angle line specsNote

angle line specs Clip angles typically comprise a round hole on one leg and a slotted hole in the other leg

angle line specs Because the Ocean Clipper uses a drill on one of the legs, the Ocean Clipper produces clip angles with a round holes on one leg and a slotted (or any shape) hole on the other leg.

angle line specs The Ocean Clipper does not lend itself to production of large volumes of angle that require slots on both legs.

angle line specs However, if this occurs on only a small quantity of your angles, then it is simply an easy operation to punch slots in the near leg leg first, rotate the material and to punch slots in the far leg in a 2nd operation, followed by the shearing operation



angle line specs

angle line specs